Please be aware that Hikvision products are region-specific and regionally supported. If you have purchased your Hikvision products from an online source or unauthorized distributor, they may not be compatible with the North American region’s firmware and are considered to be “gray market” product. If your camera has “CH” in the serial number, you are most likely using a “gray market” product. Updating the firmware from this site can lead to several complications in those cameras, up to and including camera failure. Restoring a “gray market” product to its original condition is a factory process and will result in a Chinese interface. As Hikvision warranty is void in this case, you must rely on the dealer for any service, support, and warranty of the “gray market” product. If you have any questions or concerns about the official status of your Hikvision distributor, please contact Hikvision USA Customer Service at csr.usa@hikvision.com.
  • Baseline Firmware_NVR(-Super I series)_ML_STD_V4.1.10_171107

    • Software Name:

      Baseline Firmware_NVR(-Super I series)_ML_STD_V4.1.10_171107

    • Software Size:

    • Software Description:

      「  NVR 4.0 New Flat Design, Graceful Composing, New color theme & concise icon,  which refresh the visual experience  」   「  Faster Access Speed, Clearer Menu Structure, Simpler Interaction Design, which brings you harmonized user experience」

    • Download:

      download

  • Baseline Firmware_NVR(-I series)_ML_STD_V4.1.10_171107

    • Software Name:

      Baseline Firmware_NVR(-I series)_ML_STD_V4.1.10_171107

    • Software Size:

    • Software Description:

      「  NVR 4.0 New Flat Design, Graceful Composing, New color theme & concise icon,  which refresh the visual experience  」   「  Faster Access Speed, Clearer Menu Structure, Simpler Interaction Design, which brings you harmonized user experience」

    • Download:

      download

  • Baseline Firmware_IPC_ML_V5.5.0_170914(4XX6,mobile, anti-corrosion, Explosion-proof, 20x)

    • Software Name:

      Baseline Firmware_IPC_ML_V5.5.0_170914(4XX6,mobile, anti-corrosion, Explosion-proof, 20x)

    • Software Size:

    • Software Description:

      Warning: Please note that cameras upgraded to V5.5.0 cannot be downgraded to previous versions. This firmware support Hik-Connect and do not support HiDDNS.

       

      Support models:

      DS-2CD4XX6FWD, DS-2CD65X2, DS-2XM6XX2, DS-2CD6626B-IZHS(R), DS-2XC61X2, DS-2XE6XX2, DS-2CD4A24FWD-IZ(H)(S) (T)(4.7~94mm)

       

      Updates:

      1.  ONVIF is disabled by default. ONVIF user accounts need to be created for application of ONVIF. Web component, iVMS-4200 and Batch Configuration tool are available for ONVIF configuration.

      2. Default mode of RTSP is Digest in V5.5.0. RTSP authentication would turn to digest when camera is upgraded to V5.5.0.

      3. Security    question verification is supported in LAN. The password can be reset from Web or iVMS-4200 Client by 3 frequently used questions created during device activation or configuration.

       

      For more details, please refer to the corresponding release notes.

       

      http://www.hikvision.com/en/faq_81.html

       

       

    • Download:

      download

  • Baseline Firmware_IPD_V5.5.0_170724(DExxxxW,DFxxxxxW)

    • Software Name:

      Baseline Firmware_IPD_V5.5.0_170724(DExxxxW,DFxxxxxW)

    • Software Size:

    • Software Description:

       

      Software Description:

       Warning: Please note that cameras upgraded to V5.5.0 cannot be downgraded to previous versions. This firmware support Hik-Connect and do not support HiDDNS.

       

      Support models:

      DS-2DExxxxW,DS-2DFxxxxxW

       

      Updates:

      1. ONVIF is disabled by default. ONVIF user accounts need to be created for application of ONVIF. Web component, iVMS-4200 and Batch Configuration tool are available for ONVIF configuration.

      2. Default mode of RTSP is Digest in V5.5.0. RTSP authentication would turn to digest when camera is upgraded to V5.5.0.

      3. Security question verification is supported in LAN. The password can be reset from Web or iVMS-4200 Client by 3 frequently used questions created during device activation or configuration.

      For more details, please refer to the corresponding release notes.

      http://www.hikvision.com/en/faq_81.html

       

    • Download:

      download

  • Baseline Firmware_IPD_V5.5.0_170731(DFxxxx)

    • Software Name:

      Baseline Firmware_IPD_V5.5.0_170731(DFxxxx)

    • Software Size:

    • Software Description:

       

      Software Description:

       Warning: Please note that cameras upgraded to V5.5.0 cannot be downgraded to previous versions. This firmware do not support HiDDNS.

       

      Support models:

      DS-2DFxxxx

       

      Updates:

      1. ONVIF is disabled by default. ONVIF user accounts need to be created for application of ONVIF. Web component, iVMS-4200 and Batch Configuration tool are available for ONVIF configuration.

      2. Default mode of RTSP is Digest in V5.5.0. RTSP authentication would turn to digest when camera is upgraded to V5.5.0.

      3. Security    question verification is supported in LAN. The password can be reset from Web or iVMS-4200 Client by 3 frequently used questions created during device activation or configuration.

      For more details, please refer to the corresponding release notes.

      http://www.hikvision.com/en/faq_81.html

       

    • Download:

      download

  • Baseline Firmware_IPC_ML_V5.5.0_170725(2XX2(F)WD, 2X52(F), 64X4, XM66X2)

    • Software Name:

      Baseline Firmware_IPC_ML_V5.5.0_170725(2XX2(F)WD, 2X52(F), 64X4, XM66X2)

    • Software Size:

    • Software Description:

      Warning: Please note that cameras upgraded to V5.5.0 cannot be downgraded to previous versions. This firmware support Hik-Connect and do not support HiDDNS.

       

      Support models:

      DS-2CD2XX2(F)WD, DS-2CD2X52(F), DS-2CD6414FWD(-10,-20,-30), DS-2CD6424FWD(-10,-20,-30), DS-2XM6612(D)FWD-I, DS-2XM6622(D)FWD-I

       

      Updates:

      1.  ONVIF is disabled by default. ONVIF user accounts need to be created for application of ONVIF. Web component, iVMS-4200 and Batch Configuration tool are available for ONVIF configuration.

      2. Default mode of RTSP is Digest in V5.5.0. RTSP authentication would turn to digest when camera is upgraded to V5.5.0.

      3. Security    question verification is supported in LAN. The password can be reset from Web or iVMS-4200 Client by 3 frequently used questions created during device activation or configuration.

       

      For more details, please refer to the corresponding release notes.

       

      http://www.hikvision.com/en/faq_81.html

       

       

    • Download:

      download

  • Baseline Firmware_IPC_ML_V5.5.0_170725(2XX5)

    • Software Name:

      Baseline Firmware_IPC_ML_V5.5.0_170725(2XX5)

    • Software Size:

    • Software Description:

      Warning: Please note that cameras upgraded to V5.5.0 cannot be downgraded to previous versions. This firmware support Hik-Connect and do not support HiDDNS.

       

      Support models:

      DS-2CD2XX5F(H)WD

       

      Updates:

      1. ONVIF is disabled by default. ONVIF user accounts need to be created for application of ONVIF. Web component, iVMS-4200 and Batch Configuration tool are available for ONVIF configuration.

      2. Default mode of RTSP is Digest in V5.5.0. RTSP authentication would turn to digest when camera is upgraded to V5.5.0.

      3. Security    question verification is supported in LAN. The password can be reset from Web or iVMS-4200 Client by 3 frequently used questions created during device activation or configuration.

      For more details, please refer to the corresponding release notes.

       

      http://www.hikvision.com/en/faq_81.html

       

       

    • Download:

      download

  • Baseline Firmware_CVR_V2.3.1-MC001

    • Software Name:

      Baseline Firmware_CVR_V2.3.1-MC001

    • Software Size:

    • Software Description:

       Warning Notice:

      you can use this firmware package if the current version of device is V2.3.1-MA001 or V2.3.1-MB001. Do not upgrade device if the firmware version is higher this version.


      Support Models:

      DS-A80624D

      DS-A81016S

      DS-A81024D

      DS-A82024D

      DS-A72xxxR

      DS-A71xxxR



    • Download:

      download

  • Baseline Firmware_CVR_V2.3.2

    • Software Name:

      Baseline Firmware_CVR_V2.3.2

    • Software Size:

    • Software Description:

       CVR V2.3.2-6 has been released, the version is suitable for all CVR product line. The major newand optimized function as follow:

      • Optimized VRAID

      To ensure the effectiveness of HDDsleeping function. VRAID without recording tasks will go into sleeping andtheir lifespan will be extended. Single controller device would automaticallybe VRAID after one-key configuration. Currently, duel controller device do notsupport VRAID.

      • Email Alarm

      It supports to configure email alarm via CVRweb management system.

      • Optimized encoder list display

      To avoid video loss caused whenuser deletes encoders by mistake, the display of encoders is optimized tofilter the deleted ones so that the user can focus on the online ones.


    • Download:

      download

  • Baseline Firmware_NVR (76/77NI-E)_ML_STD_V3.4.92_170228

    • Software Name:

      Baseline Firmware_NVR (76/77NI-E)_ML_STD_V3.4.92_170228

    • Software Size:

    • Software Description:

       Warning Notice:

      WARNING: Please note that this firmware will not support HiDDNS. If you use the HiDDNS service, you must convert to our new Hik-Connect service before performing this firmware upgrade. Before proceeding, make a record of your devices’ IP addresses and ports information. Then register a new Hik-Connect account by using the Web portal at www.hik-connect.com or Hik-Connect mobile app, iVMS-4500 from the IOS App store/Google Play. For more details, please kindly go to http://www.hikvision.com/en/faq_81.html.

       

      Support Models:

      DS-76xxNI-E1      DS-76xxNI-E1/xP         DS-76xxNI-E1/xN

      DS-76xxNI-E2      DS-76xxNI-E2/xP         DS-76xxNI-E2/xN

      DS-77xxNI-E4      DS-77xxNI-E4/xP

       

      Main Updates:

      1. Remove HiDDNS, IPServer;

      2. Newly add Hik-Connect service, support Hik-Connect domain and alarm push service;

      3. Hik-Connect is disabled as default

      4. Verification code creation required when enable Hik-Connect service at the first time;

      5. Other changes

      For more details, please refer to the corresponding firmware release notes.

       


       

    • Download:

      download

  • Baseline Firmware_NVR(-I series)_ML_STD_V3.4.92 170228

    • Software Name:

      Baseline Firmware_NVR(-I series)_ML_STD_V3.4.92 170228

    • Software Size:

    • Software Description:

       

      Warning Notice:

      WARNING: Please note that this firmware will not support HiDDNS. If you use the HiDDNS service, you must convert to our new Hik-Connect service before performing this firmware upgrade. Before proceeding, make a record of your devices’ IP addresses and ports information. Then register a new Hik-Connect account by using the Web portal at www.hik-connect.com or Hik-Connect mobile app, iVMS-4500 from the IOS App store/Google Play. For more details, please kindly go to http://www.hikvision.com/en/faq_81.html.

       

      Support Models:

      DS-7608NI-I2 DS-7608NI-I2/8P DS-7616NI-I2

      DS-7616NI-I2/16P DS-77xxNI-I4 DS-77xxNI-I4/16P

      DS-9632/64NI-I8 DS-9632/64NI-I16

       

      Main Updates:

      1. Remove HiDDNS, IPServer;

      2. Newly add Hik-Connect service, support Hik-Connect domain and alarm push service;

      3. Hik-Connect is disabled as default

      4. Verification code creation required when enable Hik-Connect service at the first time;

      5. Other changes

      For more details, please refer to the corresponding firmware release notes.

    • Download:

      download

  • Baseline Firmware_NVR(-K1 series)_ML_STD_V3.4.92 170228

    • Software Name:

      Baseline Firmware_NVR(-K1 series)_ML_STD_V3.4.92 170228

    • Software Size:

    • Software Description:

       

      Warning Notice:

      WARNING: Please note that this firmware will not support HiDDNS. If you use the HiDDNS service, you must convert to our new Hik-Connect service before performing this firmware upgrade. Before proceeding, make a record of your devices’ IP addresses and ports information. Then register a new Hik-Connect account by using the Web portal at www.hik-connect.com or Hik-Connect mobile app, iVMS-4500 from the IOS App store/Google Play. For more details, please kindly go to http://www.hikvision.com/en/faq_81.html.

       

      Support Models:

      DS-7604NI-K1/4P  DS-7604NI-K1

       

      Main Updates:

      1. Remove HiDDNS, IPServer;

      2. Newly add Hik-Connect service, support Hik-Connect domain and alarm push service;

      3. Hik-Connect is disabled as default

      4. Verification code creation required when enable Hik-Connect service at the first time;

      5. Other changes

      For more details, please refer to the corresponding firmware release notes.

    • Download:

      download

  • Baseline Firmware_NVR(-K2/K4 series)_ML_STD_V3.4.92 170228

    • Software Name:

      Baseline Firmware_NVR(-K2/K4 series)_ML_STD_V3.4.92 170228

    • Software Size:

    • Software Description:

       

      Warning Notice:

      WARNING: Please note that this firmware will not support HiDDNS. If you use the HiDDNS service, you must convert to our new Hik-Connect service before performing this firmware upgrade. Before proceeding, make a record of your devices’ IP addresses and ports information. Then register a new Hik-Connect account by using the Web portal at www.hik-connect.com or Hik-Connect mobile app, iVMS-4500 from the IOS App store/Google Play. For more details, please kindly go to http://www.hikvision.com/en/faq_81.html.

       

      Support Models:

      DS-7608/7616NI-K2

      DS-7608/7616NI-K2/8P(16P)

      DS-7716/7732NI-K4

      DS-7716/7732NI-K4/16P


      Main Updates:

      1. Remove HiDDNS, IPServer;

      2. Newly add Hik-Connect service, support Hik-Connect domain and alarm push service;

      3. Hik-Connect is disabled as default

      4. Verification code creation required when enable Hik-Connect service at the first time;

      5. Other changes

      For more details, please refer to the corresponding firmware release notes.

    • Download:

      download

  • Baseline Firmware_DVR(SH series)_ML_3.3.4_170220

    • Software Name:

      Baseline Firmware_DVR(SH series)_ML_3.3.4_170220

    • Software Size:

    • Software Description:

       

       

      Warning Notice:

      WARNING: Please note that this firmware will not support HiDDNS. If you use the HiDDNS service, you must convert to our new Hik-Connect service before performing this firmware upgrade. Before proceeding, make a record of your devices’ IP addresses and ports information. Then register a new Hik-Connect account by using the Web portal at www.hik-connect.com or Hik-Connect mobile app, iVMS-4500 from the IOS App store/Google Play.  For more details, please kindly go to http://www.hikvision.com/en/faq_81.html.

       

      Support models:

      DS-7104(8)HGHI-SH、DS-7104HQHI-SH

      DS-7204(8)HQHI-E1、DS-7208(16)HQHI-E2

      DS-7204(8)(16)HGHI-SH、DS-7204(8)(16)HQHI-SH

      DS-7304(8)(16)(24)(32)HGHI-SH、DS-7304(8)(16)HQHI-SH

      DS-8104(8)(16)(24)(32)HGHI-SH、DS-8104(8)(16)HQHI-SH

      DS-9004(8)(16)HQHI-SH

       

      Main Updates:

      1.      Remove HiDDNS, IPServer;

      2.      Newly add Hik-Connect service, support Hik-Connect domain and alarm push service;

      3.      Hik-Connect is disabled as default

      4.      Verification code creation required when enable Hik-Connect service at the first time;

      5.      Other changes

      For more details, please refer to the corresponding firmware release notes.

       

       

    • Download:

      download

  • Baseline Firmware_DVR(4-ch of HGHI-F)_ML_STD_V3.4.81_Build170227

    • Software Name:

      Baseline Firmware_DVR(4-ch of HGHI-F)_ML_STD_V3.4.81_Build170227

    • Software Size:

    • Software Description:

       

      Warning Notice:

      WARNING: Please note that this firmware will not support HiDDNS. If you use the HiDDNS service, you must convert to our new Hik-Connect service before performing this firmware upgrade. Before proceeding, make a record of your devices’ IP addresses and ports information. Then register a new Hik-Connect account by using the Web portal at www.hik-connect.com or Hik-Connect mobile app, iVMS-4500 from the IOS App store/Google Play.  For more details, please kindly go to http://www.hikvision.com/en/faq_81.html.

       

      Support models:

      DS-7104HGHI-F1           DS-7204HGHI-F1           DS-7204HGHI-F2

       

       

      Main Updates:

      1.      Remove HiDDNS, IPServer;

      2.      Newly add Hik-Connect service, support Hik-Connect domain and alarm push service;

      3.      Hik-Connect is disabled as default

      4.      Verification code creation required when enable Hik-Connect service at the first time;

      5.      Other changes

      For more details, please refer to the corresponding firmware release notes.

       

       

       

    • Download:

      download